Visualization Tips

May 28th, 2019
Use the Formula Manager in Builder to create new properties or modify existing ones

April 30th, 2019
Travel through hyperspace to make informed decisions about improving recovery for a well or field using Results, CMG's post-processor.

Galaxy Dashboard Graphic

April 9th, 2019
Learn how to import fracture cluster templates from 3rd party fracture modelling software. Apply the imported fracture clusters at even or uneven intervals along the well or multiple wells.

This short video shows you how to import hydraulic fractures created in 3rd party fracture modelling software, such as GOHFER, FRACPRO, and StimPlan, into Builder.

Gohfer_Image copy.jpg

March 26th, 2019
Builder’s cross-plotting tool is a valuable quality control tool to help you validate correlations between key petrophysical properties, such as permeability, porosity, and water saturation.

To create a cross plot, click on Reservoir in the menu bar and select Analyze Properties. The cross-plotting tool will, by default, display the selected property data for all active grid blocks in the model. You can customize the cross-plot series using the filters along the bottom of the tool. The new cross-plotting tool allows you to validate and quality check array properties, as well as plot and filter permeability, porosity, and water saturation.

*Please contact Support if you have any additional questions.